Soundamp

VIEW BY PRODUCTS

All Noise Control Soundamp asphalt-based vibration damping sheets

Sound damping sheets are a bitumen-based, self-adhesive sheet used for sound and vibration damping on metal panels. The adhesive side is smooth, giving complete contact with the underlying surface without air pockets or channels. Soundamp E is odorless, wear-resistant, and impregnated to prevent the absorption of water. Both pad material and adhesive can withstand temperatures between -30° C and +120° C (-22° F to +248 ° F) and are highly resistant to aging.

  • Meets FMVSS 302 and UL94 HBF
  • Resistant to water and mineral oils
  • Improves fatigue life and safety factor of treated surfaces
  • High acoustic loss factor
  • Non-hazardous & non-toxic

Applications

Typical applications include metal partitions, ducts, transportation industry, and office machines as well as numerous architectural applications. SoundampE is easily handled, and maybe cut with scissors, utility knife, or die. SoundampE should be cut into the desired shape before the backing paper is removed. The temperature of the pad and application surface should not be below room temperature during fitting.
Typical properties

0.103 @ 86°F (30° C)

Thickness 1.95 mm (0.080”)
Weight 1.6 kg/m2 (0.33 lbs/sq.ft.)
Chemical resistance resistant to water and mineral oils
Thermal conductivity (l) –0.11 W/m K(0.76 BTU-in/ft2h x °F)
Storage life 6 months max.
Storage instructions the material must be stored horizontally in its wrapping
Fire Classification Meets FMVSS 302 and is approved to UL94 HBF
Temperature Range -22°F to 248°F
Thermal Conductivity 0.76 BTU/ in/ ft2/ Hr./ °F
Loss Factor(s) 0.162 @ 32°F ( 0° C)
0.173 @ 59°F ( 15° C)
0.069 @ 113°F (45° C)
0.049 @ 140°F (60° C)
Sound Damp Specs
Installation

Caution: Soundamp should be stored only in its original packaging in a horizontal position and must be protected from freezing during storage and after application, until thoroughly cured approximately 24 hours

Step 1:
Preparation: clean surface. Be sure to remove all oil, loose paint, scale, dirt, or other foreign material. Soundamp should only be applied when the ambient and substrate temperature is 70° to 80° F.

Step 2:
Method: Soundamp should be applied to the surface of the substrate with a roller that can exert pressure to ensure an even bond between the PSA on the damping sheet and the substrate.

Step 3:
Remember During curing the ambient temperature should be between 70° and 80° F. Once the curing process is complete both the damping sheet and the PSA adhesive should withstand temperatures between -22° and 248° F.

Step 4:
Sealing: In outdoor applications sealing the Soundamp E is not necessary but may help preserve the damping sheet.

Step 5:
Shelf life: unopened packages should last up to 6 months if stored between 32° and 86° F.

Call us today at 1-561-964-9360

 

Question? Fill out our contact form for more information or a callback!