Acoustic Blanket Installation to Create a 4-Side, Floor Mounted Enclosure
Using our Acoustic Blankets to construct a 4-sided noise control solution will significantly reduce sound. The noise reduction to be expected is a range of 20 to 40 decibles. The better the construction, weight of blankets and amount of acoustic blankets used (the surface area) all factor into your sound reduction numbers. Ensuring all corners and edges are tight, and that there are no gaps is a major factor. The size of the blankets in which the amount of surface area that is available to dissipate and contain the noise is the other major factor.
Reducing noise by 20 to 40 decibles with this cost-effective, durable material is one of the best ways to solve noise control issues in commercial, facility & industrial markets.
Our Acoustic The Blankets come standard with grommets across top, mating Velcro along the vertical edges and cornerseals.
Typical uses of a 4 sided acoustic blanket enclosure are:
•Heavy Equipment
•Noisy Test Equipment
•HVAC – Heating & Cooling Units
•Generators
•Plant Equipment, Piping & Pumps
Floor Mounted Acoustic Blanket Enclosure
1.1.Mark and label the area where the enclosure will mount.
2.Locate the Floor Mounted Base Hardware, do not attach to the floor yet.
3.Slide roller tracks into track connectors on floor by squeezing ends of roller track together while sliding into connectors.
4.Lift this track up and slip the track connectors on to top of floor columns.
5.Line up the existing holes or drill holes (using a 2/16 inch hex key) as needed into the track for the screws to lock into the holes thru the track connectors.
6.Lift the panels up to the track. You can use plastic ties to attach the panels to the track through grommetted holes (already installed by All Noise Control) in each panel. Review the customer supplied drawings for the appropriate panel placement. Make sure you know which direction to place the panels, Be sure the Velcro seals are going to mate correctly.
7.Apply and tighten all screws in connectors. Adjust hardware as needed for the panels to fit.
8.Mount base to the floor.
9.Connect panels with supplied vertically attached Velcro.
View our Acoustic Blanket section here.