Blog

Acoustical Banners & Panel Systems for Sound Transmission Control

These ANC sound absorption acoustical banners shall be located and spaced as detailed on reflected ceiling plans and/or detailed on the interior elevation drawings and as indicated on room finish schedule

 Physical Properties

• Cloth Cover: Aluminum vinyl coated fiberglass cloth
  
• Thickness: 1″ thick (4′ x custom length)
  
• Width: 48″ (or custom)
  
• Length: Custom
  
• Geometric Shape: Rectangular
  
• Surface Finish : PVC Perforated One Side
  
• Core: 1# fiberglass
  
• Fire Rating: passes ASTM E84 Class I fire rating passes FMVS S .302 and FAR 25.283
  
• Flame Spread: 17.66
  
• Edge Construction: Heat Sealed
  
• Subsection Provision : (washer plates) (stiffeners) (cable)
  
• Incombustibility : Class “A” per ASTM E-84 25/0/50
  
• Acoustical Performance: 0.70 N.R.C.
  

Acoustic Banner Direct Attachment to

Beam or Bar Joists  

Figure 4    Beam Attachment  

Beam Clamps can be attached securely with bolts to stiffener/gripper. When Beam Clamp is attached to stiffener/gripper, attachment is made on same side of beam as Lapendary Panel and must be securely bolted on to the beam.

Acoustic Banner Direct Attachment to Beam or Bar Joists

Figure 5    Bar Joist Attachment

Beam Clamps can be attached securely with bolts to stiffener/gripper. When Aircraft Cables on ends with Beam Clamps to stiffener/gripper, attachment is made on the other side of bar joist or beam of Lapendary Panel and must be securely bolted on to the bar joist.