Brendan Wood International contacted All Noise Control to help them solve noise control issues in their office located in Toronto, ON. After discussing their application All Noise Control provided Brendan Wood international with a solution of ANC-3000 to block and absorb noise coming through their mechanical equipment and through several openings.

Noise Reduction Blankets

1. Layout and mark area to be enclosed.

2. While the hardware is on the ground, slide roller track (16 RT) through connectors to designated locations. To make sliding roller track into connectors easier, squeeze ends of roller track together as you slide into the end of connector. Where two pieces of track meet inside a connector make sure to deburr the ends of the track and push the butting ends together so that they fit snugly. This prevents the rollers from getting stuck in a “pot hole” inside the connector. Be sure to see the track orientation detail to ensure that the enclosure is assembled as designed.

Centre Street System contacted All Noise Control to help solve the noise control issues in their office located Brooklyn, NY. Once discussing their application All Noise Control provided Centre Street System with a product that was right for their office. The product that was introduced to them was, ANC- AB2-1 which is an 1″ Acoustical Blanket .Typically used as a sound absorption panel when you are trying to reduce the sound waves or reverberant noise energy within a piece of equipment, a room or a building.

While the Anc-3000 Wall panel is our standard noise absorption panel, it’s a perfect retrofit for virtually any application that is not in the path of high abuse areas. The rigid fiberglass fabric wrapped panel can be use aesthetically to absorb sound and significantly reduce and shorten the echo in rooms with substantial volume. Besides the selection of Guilford of Main colors, designer and customer specified fabrics are available for ordering.

Material typically required to complete installation: ANC-AB12, self-tapping screws or nails appropriate for substrate, or other framing material (optional)

1. Determine the area to be covered.

2. If the material is provided in bound pieces (no grommets or Velcro along any edge)

– Using a self-tapping screw that is appropriate for the substrate screw directly through the ANC-AB12 material into the wall or framing material.

– You may use a washer, between the screw and the ANC-AB12, to help secure the material in place

The Problem…

No matter what region we are industrialization always seems to be present. In Portland Oregon, Northwest Natural Gas Company had natural gas pipe that became a noise issue as the noise emitted from the pipe traveled easily across the open farmlands.

Northwest’s pipe was a 3′ x 10′ x 3′ exposed natural gas pipe. Mr. Camarillo, of Northwest Gas, was familiar with acoustic blankets and considering a purchase. After All Noise Control received simple sketches done by hand, they immediately knew a more effective product was available called acoustic wrap barrier. This solution offered better sound isolation and a more cost effective, weather proof material for this application.

GE Aviation contacted All Noise Control to help them solve noise control issues in their Plant located in Mcallen, TX. After discussing their application All Noise Control provided GE Aviation with a solution of ANC-AB12 to block and absorb noise coming from their mechanical equipment and through several openings.

Waste Water Treatment Plant contacted All Noise control to reduce noise generated by operation of three large (600 H.P…) Centrifugal Turbo-Air blowers at a Waste Water Treatment Plant.

Manufacturing Facility contacted All Noise control to Reduce noise levels generated by a Sweco deburrer that was operating at 85 dB (A) while maintaining maximum accessibility.

Due to the close proximity of the deburrer and other machinery to the main aisle of the manufacturing facility, reduce noise levels as much as possible along the main aisle by individually treating each piece of equipment. Maintain complete uninhibited accessibility for loading and unloading the deburrer.

The Problem….

US Coast in Kodiak, Alaska called All Noise Control to help them resolve their noise control issues with noisy office at their Pacific Alaska Freight Ways office.

The Solution…..

The versatility of our noise reduction blankets is just about unlimited.

Below we note which blanket is used for particular sample and specialty applications. The size or location of your application, or the level of unwanted noise is truly no match for our noise reduction blanket materials. Our barriers are highly noise absorbent and designed to absorb unwanted sound reflection in a variety of applications.